Haier HWM90-96A

To preventyourlaundries and washing machine from

damages,be sure to take out all of the foreign materials

from yourpocket, such as coins, buttons, sandor hair

pins etc.

Before washing,please check if the water tap is open,

and ifthe water inlet pipe is connected properly.

It is suggested to use low-foaming washing powder.

Please keepthe lint filter in good condition, and

install it to proper position duringwashing. If the

lint filter is lost or damaged,please contact the local

after-sales servicedepartment of our company.

Dismantle

Install

Dismantle

Install

The cover of lint filter

lint filter

The back cover of lint filter

lint filter

Safety precautions

Earth

The ventilation

holes atthe bottom

Soft object

Donot let the machine share one receptacle with other

electricappliances. If the plugging into the receptacle

is loose, do not use the plug any more.

Donot wash water-proof laundries like

theraincoat, bike covers etc. to avoid

abnormalvibrations in spinning.

Please plug the power plug on special

receptacle. Be sure to use three-pins

power receptacle. Ensure that the earthing

prongof the power receptacle is earthed

reliably. Use leakage protector if possible.

Do notbend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin ofthe power plug clean,if the power plug is polluted with dust,please wipe with

dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is

required to have itreplaced by the technicians of our

specialshop or the after-sale service department.

Donot put the machine at damp place like

thebathroom. Never wash it with water. Do

notput wet laundries on the control panel.

Donot use water hotter than 50

In case the washing machine is installed on ground with

carpet, do notblock the ventilation hole with carpet.

The washing machine must be positioned

so that the plug is accessible. Be sure to pull the

plug off and close the water faucet in

following cases: power failure, delivering

the machine, setting the machine idle or

cleaning the machine. Do not plug

or pull the power plug with wet hand.

Before Using

1.After washing,close the water faucet. (If needed, you can dismantle the water inlet hose).

5.Wipe off the water drops on the surface ofthe machine and inside the tub. Open the top lid for some time (

about1 hour), then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do notstore water in the washing machine for a long period. Drain the water completely after each using.

The filter screen ofthe water inlet valve is likely to be

blocked by foreign materials and influence the water

inlet.

Please clean itwith brush every two months.

If the cabinetis dirty, wipe it with wet cloth

Do notflush it directly with water.

Wipe itwith neutral detergent.

Do notwipe it with thinner, petrol, alcohol etc.

After using,please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence

your using the machine.

Disposal after washing

Please firstpull off the power plug from the receptacle before cleaning.

Clean the detergentbox and set it on

the controlpanel seat.

1.The method ofdismantle : Push it up aslant and gently.

2.The method ofinstall : install it upwards and aslant

and push itin .

Benzene

Using process

Please keep the lint filter in good condition, and

install it to proper position during washing. If the

lint filter is lost or damaged,please contact the local

after-sales service department of our company.

Dismantle

Install

Dismantle

Install

The cover of lint filter

lint filter

The back cover of lint filter

lint filter

Dismantle Install