Haier HWM90-96A Before Usingi Usingi process, Water Level button, Program selection button

Page 16

Before Usingi

Usingi process

Connection between the water inlet hose and the washer

1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens		nut of the water inlet hose
please contact our after-sale department immediately.
2	Put the nut of the water inlet hose on the valve jointer.
3	Fasten the nut. Swing it gently to confirm if it's suitable.
	jointer of the water inlet valve water absorption cushion.

Child lock function

This function is used to protect the children and prevent them from changing the washing procedure.

Start up:The program is optional anytime after the machine has been starded.Push and hold the WATER LEVEL button and SPIN button for more than 3 seconds at the same time.After a beep sound,the child safety lock program works;all buttons are locked and cannot be selected. During this period, when open the top lid, the machine will give a beep alarm. 15 seconds later ,no matter opening or closing the top lid, the machine goes on alarming and drains water.After

draining, 10 minutes later power off automatically.

Power On/Off button

Push the POWER ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. Push the POWER ON/OFF button to switch on the power. If the START/PAUSE button is not pushed, the washing machine will automatically switch off the power after 5 minutes.

Connection between the jointer of the water inlet hose and the water inlet hose

Release:push and hold WATER LEVEL button and SPIN button for more than 3 seconds at the same time.After a beep sound ,the child safety lock program is released;all buttons are unlocked.

Reserve/remain time indicator digitron

During sensing, it displays --

During reserve procedure, it displays the remained reserve time (in hour)

1.Push down the slider. Insert the water inlet hose into the jointer.

2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.

the jointer of the water inlet hose

During operation of programs, it displays the remained time (minute). If the remained time exceeds 99 minutes,

it adopts A at tens place to represent 100 minutes, b to represent 110 minutes. For instance, A3 represents 103 minutes. In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)

Locking level Slider

	TIME REMAINED(MINUTES)	DRY-CLEANING	STANDARD
		SILK	SAVE
		COTTON	BLANKET
(18L)	RESERVE(HOURS LATER)	TUB CLEAN	WOOLLEN
MIN

Check the connection between the jointer of the water inlet hose

START

POWER

ON/OFF

and the water faucet

	PROGRAM
WATER LEVEL	RESERVE

PAUSE

1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection

Start/Pause button

After the power is switched on, push it to Start the machine

between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.

Dismantle the water inlet hose

1.Close the water faucet.

2.Press the locking lever. Push down the slider. Then pull of the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.

Locking level Slider

WATER LEVEL button

If the standard program,the washing machine can detect

the laundries automatically.After detection, it will set the water level to suitable value among 4, 6, 8,and 10 automatically.

You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the START/PAUSE button to make new setting.

If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .

If wet laundries are put in, it may display water level 10 . You must set suitable water level by yourself.

If SAVE program is selected, it will display water level 2 .the water is never to be changed,When water level 2 is reached in water filling, it will perform washing while filling water. When water level 3 is reached,it will change to standard washing. During the program of the woolen or the dry-cleaning , it will display water level 10 .the water level is selected from 8 to10;

RESERVE button

In standard operation mode, the reserve indicator light is off. The time remain indicator light is on. The digitron displays the time remained (in minute) before the washing is finished. Push down the RESERVE button. The digitron displays the reserve time of finishing washing(in hour).When the machine is started, the reserve indicator light is on, indicating that the reserve function is running and other

During working, push it to pause working.

During pause, push it to resume working.

PROGRAM selection button

Following automatic programs are available for selection

Program	Applicable situation
Standard	Common washing
Save	Quick and high-efficiency wash for
	common laundries
Blanket	Washing the relatively big and thick laundriesr
Woollen	Washing the woolen textiles
	Washing for laundries requiring dry-clean
Dry-cleaning	(see to dry-clean description and No.12
	of the points of attention for details)

Remarks: use the new hose sets supplied with the washer. Any other old hose sets should not be used.

During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water . The water level decided may be different from actual value because of the different moisture level of the laundries.

lights are off.

Silk	Washing the textile
Cotton	Washing the cotton textiles
	Avoid growing mildew on the outer tub
Tub clean	and the inner tub

6

11