4.Install the drain hose to the side of the washer using the drain hose damp provided. The drain hose must be placed into a drain pipe or sink at least 1 1/2inches in diameter. Use the goose neck to the hose in place. To avoid possible water back up, the drain hose must reach a minimum height of 1000mm and a maximum height of 1500mm.
Water Inlet | Water Supply Hose |
|
Goose Neck
Hose Bend
Drain Hose
5.Plug the washer into a regular
Note :Carefully inspect all around the machine and at the back for any leaks, and tighten any loose connections.
Caution:If, after completing these steps, you are unsure that unit is properly installed, contact a qualified installer.To ensure that your washer is properly installed, it is recommended that it be installed by a certified installer.
17
