Haier JC-110GD Cleaning and Maintenance, Changing the Light Bulb See fig. #3, General, English

English English

Proper Wine Cellar Care and Cleaning

Cleaning and Maintenance

Warning: To avoid electric shock always unplug your wine cellar before cleaning. Ignoring this warning may result in death or injury.

Caution: Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage.

General:

•Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use sponge or soft cloth, dampened with the cleaning solution, to wipe down your wine cooler.

•Rinse with clean warm water and dry with a soft cloth.

•Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,concentrated detergents, solvents or metal scouring pads. SOME of these chemicals may dissolve, damage and/or discolor your wine cellar.

Door Gaskets:

•Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to assure a proper seal.

•Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and assure a good seal.

Changing the Light Bulb See fig. #3

• Remove the top shelf.	fig. # 3
• Using a philliphead screwdriver
unscrew the 2 screws that hold the
bulb cover.
• Unscrew the bulb from the socket.
• Screw on a new bulb not exceeding

15 watts.

•Replace the light bulb cover to its original position using the 2 screws.

• Place the top shelf back into its original position.

10