Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
No picture, no sound | Verify if the television is properly plugged. |
|
Verify if the television is properly supplied power. |
| |
| Verify if electricity is available. |
|
|
|
|
Blank screen | Verify if correct signals are input. |
|
Press TV/AV button to change signal input to TV input. |
| |
| Restart the television of power supply is interrupted. |
|
|
|
|
| Press MUTE button and verify if Mute mode is set. |
|
No sound | Switch to other channel and verify if the same problem |
|
happens. |
| |
|
| |
| Press VOL+ button to see if the problem can be solved. |
|
Poor sound | Verify if sound system is correct. Refer to some chapter |
|
for adjust. |
| |
|
| |
|
|
|
No picture in some | Verify if correct channel is selected. |
|
Adjust the antenna. |
| |
channel |
| |
Make adjustments by FINE TUNE and MANUAL SEARCH. |
| |
|
| |
|
|
|
No color for some channel | Verify if the same problem exists in other channels. |
|
Check out of picture and sound systems. |
| |
program (black and white) | Refer to relative instructions in the Manual for color |
|
| adjust. |
|
Spots with some or | Verify if the antenna is correctly connected. |
|
Verify if the antenna is in good condition. |
| |
all pictures | Make fine adjustment of channel. |
|
|
|
|
| Disconnect the television from power supply and, 10 |
|
Television out of control | seconds later, connect the television to the power supply. |
|
| If the problem still exists, contact authorized |
|
| service for technical assistance. |
|
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
