23
for 480i content or 30 minutes for
1080i content.
Once 4GB of data gets stored, the
time shift function will delete the
stored data and restart the buffering
of content. This occurs even for
USB devices larger than 4GB.

Note:

Time Shift limitations:

1. When the Time Shift feature is
activated, only the PLAY/ PAUSE/
STOP/FWD/REV/VOL+/VOL-/
MUTE keys and some basic
operation keys (ENTER/EXIT/
navigation keys) are available. When
a key is pressed and that function
is unavailable, the dialog box shown
below will appear.
This Key Is Unavailable During Time Shift Operation !
OK
2. Video playback may not be smooth
and skip if USB recording speed
does not meet the minimum
requirements (for certain 1080i/p
signals).
3. Do Not remove USB disk or switch
off the power during Time Shift
operations. It will abort once the
signal is lost.
4. Do Not remove the signal source
during Time Shift operations.
5. Do Not quickly and repeatedly
change operations between PLAY/
PAUSE/FWD/REV.
6. Sleep timer will be terminated if it
had been set before Time Shift.
7. The USB storage size needs to be
the size of 4GB,8GB or 16GB.
8. Video may become pixelated when
Video bit rate is too low.
9. Close Caption setting is not
available during Time Shift mode.
10. Not all USB devices are compatible.
Below is a list of recommended USB
drvies.Models that are not listed
may be compatible, but it is not
guaranteed to work.
SanDisk Extreme®
Contour™ USB Flash Drive
- 8GB SDCZ8-8192-E75
SanDisk Extreme®
Contour™ USB Flash Drive
- 16GB SDCZ8-016G-A75
Kingston DataTraveler 410
USB 2.0 Flash Drive
- 8GB DT410/8GB
Kingston DataTraveler 410
USB 2.0 Flash Drive
- 16GB DT410/16GB
OCZ Technology Rally2
USB 2.0 Flash Drive - 4GB
OCZUSBR2DC-4GB
OCZ Technology ATV
USB 2.0 Flash Drive
- 8GB OCZUSBATV-8GB
OCZ Technology Rally2
USB 2.0 Flash Drive
- 8GB OCZUSBR2DC-8GB
11. This feature is not available for all
digital TV, such as scrambled or
audio only channels.

12. Reset to Default: Restore all the

default settings.

VGA MENU

This option only shown and available while
in VGA mode, which provides several
options to fine tune the VGA display.

1. H-Position: Adjust the horizontal

position of the picture. (0-40)

2. V-Position: Adjust the vertical

position of the picture. (0-16)

3. Clock: Adjust picture clock to

reduce Vertical-Line noise. (0-16)

4. Phase: Adjust picture phase to

reduce Horizontal-Line noise. (0-

31)

hsilgnE
hsilgnE
hsilgnE
hsilgnE