Basic Receiving and Playing Operations

menu

Channel Edit

Search

DOWN 40.00MHz UP

Fine Tune

40.00MHz

Color System

PAL

Sound System

D/K

Skip

ON

Sound

 

 

 

Tuning

 

❖ Search

Press 5/6 to select the Search option, and finally press 3/4to start manual search. Upon finding a program, the search will automatically stop, and the program will be stored onto the current channel.

You may stop the search by pressing OK or MENU.

❖ Fine Tune

Press 5/6 to select the Fine Tune option, and then press 3/4 to start UP or DOWN fine tuning until obtaining a relatively good picture effect. The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough. Normally, the optimal picture effect can be obtained without fine tuning when watching TV programs, and fine tuning is to meet the need of adjusting a certain program.

❖ Color system

Press 5/6 to select the Color Systems option, and then press 3/4 to select correct color system.

The TV is designed with three systems for your choice, i.e. Auto, PAL , SECAM and NTSC. Generally, the system is set as Auto and it is not necessary to make an adjustment. The system is normally set as Auto during auto search.

❖ Sound system

The TV is designed with four systems for your choice, i.e. D/K, M, B/G and I. Generally, it is not necessary to adjust the system. The system is normally set as DK during auto search.

❖ Skip

When the skip is set ON, the channel will be skipped when pressing CH or CH and only can be selected by pressing 0-9 numerical keys.

If you want to recover the skipped channel

1.Use Direct-digit Choosing button to select the number of the channel to be recovered.

2.Do the above steps again.

3.Press3/4to set Skip as Off.

Auto search

APress MENU on the remote control to display main

menu, and then press 3/4 to select Tuning menu. (Note: Only when Tuning Lock in the H. Lock menu is Off can the Channel menu be selected.)

menu

Channel Edit

Auto Search

Prog. Exchange

Sound Tuning

Bpress 5/6 to select the Auto Search option, press OK to enter the auto search menu, afterwards press

3/4 to select the Confirm option, and finally press OK to confirm the starting of auto search.

menu

Sound Tuning

CDuring auto search, the scale value on the progress bar is continually increasing, indicating the auto search is in progress. After finishing the auto search, the TV will play the channel starting the auto search. To stop the search in halfway, just press MENU/OK, and the TV will play the first searched channel.

menu

Auto Search

Auto Searching

Found Channel(s):2

Frequency:25NHz

40%

Cancel

Sound Tuning

14 TFT -LCD television Owner’s Manual

Page 14
Image 14
Haier L32K3 owner manual Auto search