Haier L32K3 owner manual Maintenance, Troubleshooting

Basic Receiving and Playing Operations

❖❖ Photo Slide Time

Set the scan speed of pictures to be scanned in slide form.

There are three options (Slow/Middle/Fast). Press 3/4 to select the desired option.

Maintenance

Maintenance

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

AHere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.

BMake sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

Problem	Possible remedies
	Turn onthe power supply; Properly
No	plug theTV setto the powersocket;
	Check to see if the power cable of other
picture,
	appliance is plugged in the TV set. Make
no sound
	sure that the power cable of the TV set
	is properly connected.
Problem	Possible remedies
Good	Depress the volume button;
picture,
	Check out theaudio frequency input signals.
no sound
Failure of	Check to see if the remote controller
	display receiving window are blocked
remote
	by other objects and if batteries are
controller
	properly loaded.
	Designate the item of color from the
No color,	Picture menu and depress the volume
	button; Keep the display and VCR
weak color	separate a reasonable space; Activate
or poor	some functions to store picture
picture	brightness; Make sure that the display
	and signal source are available and
	turned on.
Excessive
brightness	Adjust brightness or contrast.
or darkness
Picture
too big or	Adjust the setup of sizes.
small
One
speaker	Balance the sound in the menu.
failure
Slight
sound	It is a normal phenomenon.
from
display
Note

Troubleshooting

For the sake of time and cost, it is strongly recommended that you checkout the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance.

RR Do not leave the television with static picture in an extended period as it may result in residual image on your television screen.

Note

RR Production of the screen requires high and precision technologies. However, there might be some dank or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea

24 TFT -LCD television Owner’s Manual