Haier L37A9-AK owner manual DVD Setup, Hdmi or DVI Setup, How to connect, How to use

External Equipment Connections

DVD Setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure.

					AV OUT
Y	PbPr	CbCr	L AUDIO R	VIDEO	L AUDIO R
					S-VIDEO IN
		IN		AV1 IN

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote control to select S-VIDEO or YPbPr/YCbCr mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

or

DVD

HDMI or DVI Setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or HDMI port for video connections, depending on your set-top box connections available.

Then, make the corresponding audio connections.

							AV OUT
IN1	IN2
		Y	PbCb	CbCr	L AUDIO R	VIDEO	L AUDIO R
HDMI/DVI VIDEO		VGA IN
						AV IN

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use TV/AV on the remote control to select VGA or HDMI (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external equipment for program play.

10