![](/images/new-backgrounds/1125732/12573229x1.webp)
OTHER SETTING FUNCTION
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
-HDMI TM . The HDMI logo and
To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.
How To Connect
1.Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).
2.No separated audio connection is necessary.
How To Use
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
How To Set
The method to set is similar to TV.
You can connect outside signal source VCR, VCD DVD, PC equipment to the TV set.
Antenna Input
1.Connect the VCR radio frequency input to the back radio frequency input of the LCD.
2.Connect the antenna to VCR antenna input.
3.Press TV/AV button to select TV mode.
4.Press PLAY button in VCR to start watching.
If you use S terminal as signal input source, the image quality will be better than video (AV). 1.Connect S terminal output in DVD to S terminal
input in TV set.
2.Connect S terminal left/right audio output in DVD to the relevant port in TV set.
3.Press TV/AV button repeatedly until the display mode is
4.Press PLAY button in DVD to broadcast. At this time the image programs in DVD will broadcast in TV set.
YPbPr input
1. Component terminal (Y/PbCb/PrCr) connect to the component output of picture output device (such as DVD, TUNER and so on ), the sound is input from AUDIO IN:
2.Press TV/AV button to select YPbPr mode. 3.Press PLAY button on the external device to start
watching.
SCART input
1.Connect AUDIO OUT in the VCD/DVD to the AUDIO/VIDEO port in the SCART commutator in the accessory.
2.Connect the SCART commutator in the accessory to the SCART1 or SCART2 in the TV set.
3.When SCART commutator select INPUT, it enter video input status, when SCART commutator select OUTPUT, it enter video output status.
4.Press TV/AV button to select SCART1 or SCART2 mode.
5.Press PLAY button in VCD/DVD to start watching. Note: please never use the S terminal in commutator.
HDMI input
1.Connect HDMI signal source output to the HDMI input in this TV set.
2.Press TV/AV button to select HDMI mode. 3.Press PLAY button on the external device to start
watching.
ANT .
VCR
L | R |
|
|
| |
AUDIO IN | IN | |
|
DVD
L R
AUDIO IN | Y Cb/Pb Cr/Pr |
DVD
SCART1 SCART2
INPUT OUTPUT
AUDIO | AUDIO | VIDEO | |
(L/MONO) | (R) |
|
|
HDMI
DVD
27 |
|
|
|
| 28 |
|
| ||||
|
|
|