WARNING AND CAUTION
4To prevent fire, do not use or store any
flammable materials near the unit.
To prevent fire, do not place the unit near
a damp wall.
To prevent electric shock, ensure that
any external antenna connected to the set
is clear of contact with any power lines.
Do not plug / unplug the unit while your
hands are wet. This may cause an electric
shock.
Please ensure a solid connection with
the AC wall socket in order to avoid
shock and potential fire.
To prevent electric shock or fire, please
note to prevent rain from entering the set
along the wire connected to the outside
antenna.
When cleaning, please unplug the unit.
Use a soft cotton cloth. Do not use any
abrasive cleansers, and prevent water
from entering the set.
If any plugs or input wires are dirty, unplug
the set and clean. This will prevent risk of
electric shock or fire.
If the set is not going to be used for an
extended period, unplug the unit from
the AC wall outlet.
25USING YOUR TV AS A COMPUTER DISPLAYVGA-AUD IO IN
VGA
VGA input
1. Connect the VGA output port in the computer to the VGA port in the TV set.
2. Connect the audio cable in computer to VGA AUDIO IN port in TV set.
3. Press TV/AV button to select VGA mode.
4. Turning on the computer, the screen image of the computer will display on the
TV set.
At this time, the TV set can be used as a computer display.
Note:
1. If the temperature of the TV set is rather low, it is normal that there may be some
artifacts when the set is first turned on.
2. Nonconforming pixels may occur on the panel, but they have no influence on the
normal function of the display.
3. In the standard operation, It is normal if there is one bright dot or dark dot on the
screen.
VGA
SVGA
XGA
640 x 480
800 x 600
1024 x 768
31.5kHz
37.9kHz
48.4kHz
60Hz
60Hz
60Hz
Mode Resolution Horizontal
Frequency Vertical
Frequency
RESOLUTION:
Note: The above parameters are VESA standard.