Haier L26A9A-A1, L42A9A-A1, L40A9A-A1 Base DISASSEMBLY/ASSEMBLY Method, Other Setting Function

WALL MOUNT BRACKET ASSEMBLY INSTRUCTIONS

L26A9A-A1/L32A9A-A1

Airproof board

Base

(1)In order not to scratch the TV set, it is recommended putting the TV set with face down on the soft and clean blanket.

(2)Disassemble the six screws from base and remove the base. (This item will be cancelled if the product is without base.)

(3)Mount the airproof board.

(4)After completing the above operations, the complete set can be mounted on the wall mount bracket.(Wall mount bracket operations refer to the assembly instructions of it.)

Note: 1. The arrow indicates the position of screw. 2. Wall mount bracket is additional purchase.

BASE DISASSEMBLY/ASSEMBLY METHOD

L37A9A-A1/L40A9A-A1/L42A9A-A1

(1)As figure, removing the four M4×20 screws, the base will be disassembled.

(2)As figure, mounting the four M4×20 screws, the base will be assembled.

Note:

The arrow indicates the position of screw.

The position to strike the screw.

OTHER SETTING FUNCTION

-HDMI TM . The HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing.

-This TV can receive the High-Definition Multimedia Interface (HDMI).

-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p and 1920x1080i resolution.

-When you connect this TV with a source device (DVD player, Set Top Box or PC) supporting Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.

-If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connecting includes both video and audio.

How To Connect

1.Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).

2.No separated audio connection is necessary.

How To Use

-If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

-Select HDMI input source by using TV/AV button.

How To Set

The method to set is similar to TV.

6 23