Desa GK20 Product Identification, Assembly, Unpacking, FOR MODEL GK30 ONLY, Tools Needed

PRODUCT IDENTIFICATION UNPACKING ASSEMBLY

3

PRODUCT IDENTIFICATION

Hot Air	Handle
Outlet
Upper
Shell	Fan Guard
Lower	Air Filter
	End
Shell	Cover

Fuel

Tank

Side Cover

ON/OFF Switch with Light

Power

Cord

Fuel Cap

Figure 1 - Model GK20

Hot Air Outlet

Upper Shell

Lower

ASSEMBLY

(FOR MODEL GK30 ONLY)

These models are furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipping carton.

Tools Needed

•Medium Phillips Screwdriver

•3/8" Open or Adjustable Wrench

•Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: When installing wheels, point extended hub of wheels toward wheel support frame (see Figure 3).

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel support frame.

4.Place front handle and rear handle on top of fuel tank flange. Insert screws through handles, fuel tank flange, and wheel sup- port frame. Attach nut finger tight after each screw is inserted.

5.After all screws are inserted, tighten nuts firmly.

Front Handle

Screw

Shell
	Fan
Fuel	Guard
Cap	Fuel
	Tank
Side Cover	Power Cord
	ON/OFF
	Switch with
	Light
Figure 2 - Model GK30

UNPACKING

1.Remove all packing items applied to heater for shipment.

2.Remove all items from carton.

3.Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

Hot Air

Outlet

Fuel Tank

Flange

Wheel

Support

Frame

Wheel Nut

Cap Nut

Rear

Handle

Air

Inlet

Extended

Hub

Axle

Figure 3 - Wheel and Handle Assembly for Model GKL30

108954