External Equipment Connections
Choose Your Connection
There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve.
The following are examples of someways to connect your TV. Choose the connection which is best for you.
VCR Connection
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
DIGITAL OUT | HDMI IN |
(COAXIAL) |
Y | Pb | Pr | PC/DVI AUDIO IN | PC IN |
DVD Setup
How to connect
AConnect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV’ as shown in the figure.
|
|
| DIGITAL OUT | HDMI IN |
|
|
| (COAXIAL) | |
Y | Pb | Pr | PC/DVI AUDIO IN | PC IN |
|
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.
Connection Option 2
AConnect the audio and video cables from the VCR’s output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
BInsert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
CSelect the input source with using the SOURCE button on the remote control, and then press 5/6button to select the source, press thebutton to confirm.
How to use
ATurn on the DVD player, insert a DVD.
BUse the SOURCE button on the remote control,and then press 5/6button to to select COMPONENT mode, press thebutton to confirm.
CPress Play button on external equipment for program play.
DRefer to the DVD player’s manual for operating instructions.
HDMI or DVI Setup
To watch digitally broadcast programs, purchase and connect a digital
How to connect
•• Use the TV’s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or HDMI port for video connections, depending on your
10 LED
