Troubleshing and Specification
❖❖ Search
Press 5/6to select the Search option, and finally press 3/4to start manual search. Upon finding a program, the search will automatically stop, and the program will be stored onto the current channel.
You may stop the search by pressing OK or MENU.
❖❖ Fine Tune
Press 5/6to select the Fine Tune option, and then press 3/4to start UP or DOWN fine tuning until obtaining a relatively good picture effect. The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough. Normally, the optimal picture effect can be obtained without fine tuning when watching TV programs, and fine tuning is to meet the need of adjusting a certain program.
❖❖ Color system
Press 5/6to select the Color Systems option, and then press 3/4to select correct color system.
The TV is designed with three systems for your choice, i.e. Auto, PAL , SECAM and NTSC. Generally, the system is set as Auto and it is not necessary to make an adjustment. The system is normally set as Auto during auto search.
❖❖ Sound system
The TV is designed with four systems for your choice, i.e. D/K, M, B/G and I. Generally, it is not necessary to adjust the system. The system is normally set as DK during auto search.
❖❖ Skip
When the skip is set ON, the channel will be skipped when pressing CH ∧ or CH ∨ and only can be selected by pressing
If you want to recover the skipped channel
1.Use
2.Do the above steps again.
3.Press3/4to set Skip as Off.
Automatic search
APress MENU on the remote control to display main
menu, and then press 3/4to select Tuning menu. (Note: Only when Tuning Lock in the H. Lock menu is Off can the Channel menu be selected.)
Bpress 5/6to select the Auto Search option, press OK to enter the auto search menu, afterwards press
3/4to select the Confirm option, and finally press OK to confirm the starting of auto search.
menu
Sound 
Tuning
CDuring auto search, the scale value on the progress bar is continually increasing, indicating the auto search is in progress. After finishing the auto search, the TV will play the channel starting the auto search. To stop the search in halfway, just press MENU/OK, and the TV will play the first searched channel.
menu
Auto Search
Auto Searching
Found Channel(s):2
Frequency:25NHz
40%
Cancel
Sound 
Tuning
Exchange
APress MENU on the remote control unit or MENU on the TV’s front panel to display main menu, and then press3/4to select Tuning menu.
BPress 5/6to select the Prog. Exchange option, and then press OK to enter its submenu.
CPress 5/6to select the To Channel option, and
14 LED
