Safety Warnings
The product should be tightly secured to table/wall in accordance with the installation instructions to prevent injury or damage caused by dropping.
Do not position the product close to water or oil (e.g. cooking oil or lubricating oil), as this may cause a fire hazard.
Do not use damaged or worn electrical plugs and keep cables away from heat sources to avoid electric shocks and fire hazards.
To avoid collapsing, the product must be placed on a solid and stable surface.
To avoid fire hazards, keep the product away from transformers or heat sources.
To avoid fire hazards, do not use this product in direct sunlight or close to heat sources.
Unplug the power supply and antenna of the product during a rainstorm and particularly during a thunderstorm.
To avoid fire hazards, do not connect multiple sockets in parallel and do not connect multiple plugs to the same socket.
To avoid electric shocks or fire hazards, unauthorised disassembly of the television is prohibited. Contact an authorised
provider if technical servicing is required.
Disconnect the product from the power supply and contact an authorised
To avoid explosions and fire hazards, don't use or store inflammable materials near the product.
To avoid electric shocks, the antenna of the product should be away from electrical cables.
Always make sure that the television is firmly plugged in, as a poor electrical connection might cause a fire.
Before cleaning the product, unplug the television, and use soft fabric, not chemicals. Make
sure that no water comes 
into contact with the product.
EN
LED Backlit Flat TV Instruction Manual
