Haier LD42K3, LE42H330, LE46H330, LE55H330 owner manual Adjust Menu, Time Menu

Basic Receiving and Playing Operations

Net Upgrade

Press / to select OK or Cancel to upgrade the TV set by internet and flash.

Adjust Menu

The TV can be used as a display, and you may adjust relevant settings. Press SOURCE to switch the signal input to PC mode.

APress MENU to display the screen main menu, and

then press / to select the Adjust menu as shown in the below figure.

B	Press	/	to select the option to be adjusted.
C	Press	/	to adjust it.

Image Position

This is used to adjusting H-Position and V-Position.

Horizontal-Size

Press / to adjust it(0---100).

Time Menu

A	Press MENU button and then use / button to
	select Time menu.
B	Press	/	to select the desired option, press OK

to enter its submenu.





Current Time: The current time is calculated from the moment upon turning the TV on. At first, check whether the time indicated on the TV's clock is consistent with the standard time of your time zone; if not, adjust the clock as follows:

•Press MENU on the remote control unit or MENU on the TV’s front panel to display the main menu,

	and then press			/	to select the Timer menu,
	afterwards press			/	to select the Current Time
	option, press OK to enter the submenu.
•	Press	/	to set hour and minute.
•	Press	/	to adjust the time.

•After finishing time setting, press OK or MENU to confirm.

Vertical-Size

Press / to adjust it(0---100).

Auto Adjust

Vertical and Horizontal position of picture can be adjusted in this item.

Clock

This is used for adjusting the phase of pixel clock in PC mode.

Phase

This is used for adjusting H Position and V Position as well as relative parameters in PC modes.

Reset

Return to factory default settings.

Off Time/On Time: Set a time for the TV to turn off or on.This function allows the TV to automatically turn on or enter standby mode upon reaching the preset time.

•Press OK to enter the setting screen, and then

press	/	to select ON or OFF, if you select ON,
press	/	to set hour and minute. ON indicates

the On/Off Time function is enabled while OFF indicates the function is disabled.

•.After finishing time setting, press OK or MENU to confirm.

Note

After setting the On/Off Time function, if the TV is AC off or forcible DC off, the function will be automatically

LED -LCD television Owner’s Manual 19