Haier MS-2480EG(SS) user manual Answers to Questions, Answers to questions

Models: MS-2480EG(SS)

1 19
Download 19 pages 32.42 Kb
Page 17
Image 17
Answers to Questions

Answers to Questions

Answers to questions

Why is the lamp not on?

Why is the vapor emitted from the air discharge outlet?

Why is there water overflowing below the door?

Can the microwave leak from the view window of the door?

If start the microwave oven without load of food, will it damage the oven?

Why does the food need to be laid aside after cooking?

1.The lamp has failed.

2.The timer is not set.

It is normal that the vapor may emit during cooking. Sometimes the vapor will condensed into water and flow out. It is normal phenomenon.

No. The metal shelter can reflect the energy back into the oven. The view window only allows harmless light to pass through. The microwave energy can not pass through.

Yes. NEVER do that.

It is important to lay the food aside for several minutes. Cooking by microwave oven makes the food retrain heat inside. After you take out the food from the oven, the inside of the food will continue heating for 2-3 minutes. It can assist the cooking the joint of the food, vegetables or cookies completely outside the oven by laying aside.

Why is it not so quick as stated in the manual to cook with my microwave oven?

Check the user’s manual. Confirm that you follow the instruction completely. Find out the reason for setting different times. The setting of cooking time is only for reference. To avoid excess cooking, you shall learn the technology of cooking with microwave. The volume, weight and shape of the food can all influence the cooking. Take the instruction as reference, and learn it independently.

Why is there sparking or

It may be owing to following:1. Dishware with metal part is

cracking sound during cooking

used (including gold and silver);

sometimes?

2.

Fork or other metal dishware are left in the oven;

 

3. Too much metallic foil are used;

 

4.

Metallic thread is used to bind the food.

In maintenance, the technicians shall pay attention that:

Components that are easy to dismantled and likely to touch voltage above 240V:

1.Magnetron

2.High-voltage transformer

3.High-voltage capacitor

4.High-voltage diode

5.AK rectifier Components that may

cause excess microwave leakage:

1.Improper installation of the magnetron on the wave guide

2.Improper adjusting of the door hook, door body and up/down hinges

3.Door body and shell are damaged

The above problems can cause excess microwave leakage

Microwave radiation

Do not expose yourself to the radiation of the microwave generator or

other components that transfer the microwave energy.

15

Page 17
Image 17
Haier MS-2480EG(SS) user manual Answers to Questions, Answers to questions