English
SETTING UP YOUR OVEN
Parts and Accessories
Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories:
Glass tray | 1 | F | |
Turntable ring assembly | 1 | ||
|
A.Control panel B.Turntable shaft C.Turntable ring assembly D.Glass tray E.Observation window F.Door assembly G.Safety interlock system
G 
E D C B A
Turntable Installation | Glass tray |
a. Never place the glass tray upside down. | |
The glass tray should never be restricted. |
|
b. Both glass tray and turntable ring assembly must always be used during cooking.
c. All food and containers of food are always placed on the glass tray for cooking.
d. If glass tray or turntable ring assembly
cracks or breaks, contact your nearest authorized service center.
Hub (underside)
Turntable ring assembly
Countertop Installation
Remove all packing material and accessories. Examine the oven for any damagesuch as dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surfaceDo not remove the light brown Mica cover that is attached to the oven cavity to protect themagnetron.
Installation
1.Select a level surface that provide enough open space for the intake and/or outlet vents.A minimum clearance of 3.0 inches (7.5cm) is required between the oven and any adjacent walls. One side must be open.
(1)Leave a minimum clearance of 12 inches (30cm) above the oven.
(2)Do not remove the legs from the bottom of the oven.
(3)Blocking the intake and/or outlet openings can damage the oven.
(4)Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception.
8
