Adjust Menu
In VGA input mode ,
When VGA
HDMI input mode is set
1 Press MENU button and then use VOL+/- button to select Adjust menu .
2 Press CH+/- button to select the item to be adjusted, then press the VOL+/- button to adjust the desired value.
Auto Adjust
This is used to reset the default setting parameters (After the operation, Auto Adjusting will be display on the screen)
Clock
This is used for adjusting H Position and V Position as well as relative parameters in VGA modes.
Phase
This is used for adjusting the phase of pixel clock in VGA mode.
menu
OK
OK
Input Set
Horizontal or vertical position of picture can be adjusted in this item.
Note:
1.As adjusting H position or V position parameter, It is natural that the picture will have faintness once in a while if the range is more, then to adjust contrarily to normal position.
2.As the frequency of display differ in PC device
you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen.
26
