Preparation before Usage
Remove the packing
Remove the foam support and all adhesive tapes used to retain accessories.
Install your refrigerator in proper location:
Refer to ‘Location’ section for details.
Check accessories and documents:
Check accessories and documents according to the packing list. Call the dealer if anything’s left out.
Install bottom trim kit:
Take the bottom trim kit out from the refrigerator compartment, and install and fasten it with screws to the position as shown in the figure.
Take down the model number and serial number of the machine on warranty certificate for future
information query.
NOTE
Clean before using:
Before storing food in the refrigerator, please clean the interior and exterior surface of the machine with soda solution (one spoon of soda into 4 L water).
Start using
Connect to mains:
At first
Temperature setting mode:
Manual setting mode: allow manual temperature setting by operating temperature adjustment keys. Please refer to the later ‘Function’ section for details.
Stand still:
After the refrigerator is installed and cleaned, allow 6 hours before connecting the mains, thus to obtain proper operation of the machine.
Temperature setting mode:
Manual setting mode: allow manual temperature setting by operating temperature adjustment keys. Please refer to the later ‘Function’ section for details.
| It takes time for the temperature to change |
| according to change of settings. The actual |
| length needed depends on how much |
| change of settings were made, the ambient |
NOTE | temperature there is, openings of the |
| door(s), and how much food is stored in the |
| refrigerator. |
|
|
- 9 -
