English
operating your washer
High
The Control Panel |
|
| 4 |
3 | 5 | 2 | 1 |
STATUS
CYCLE | QUICK WASH |
|
|
| |
| HEAVY | NORMAL |
Medium
| Manual |
Low | Water Level |
Power ON/OFF: (1)
•Press the POWER button once to turn ON the power to the washer. Press it again to turn the power OFF.
Start/Pause: (2)
•Press this button once to start the wash process. Press this button once again to pause the activity during the wash cycle. Push it again to resume the wash cycle.
CYCLE Select: (3)
• Select your desired cycle program by pressing the “CYCLE Select” button. There are 3 main washing cycles, Normal, Heavy and Quickwash, along with a total of 7 wash operation options.
Press the CYCLE select button for the desired setting.
Power
S t a r t
Pause
CYCLE
HEAVY NORMAL
Water Level Selector: (4)
•Turn the Water Level Selector knob to select the proper water level setting. You may select from low, medium and high water level settings depending on the wash load. There is also a MANUAL overide, by holding the knob in the manual position, until the desired water level is achieved
STATUS
Function and Status Indicator Lights: (5)
• The function display lights indicate that a selected NORMAL feature is ON or what the cycle is about to begin.
•During the wash cycle, a flashing light indicates the current STATUS of wash/rinse/spin cycle.
Note: Rapid flashing indicates that the washer is not operating properly.
15
