English
unpacking and checking parts
Unpacking
1.Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove the
bottom Styrofoam that is used to protect the washer from shipping damage due to vibrations and shock.
2.Inspect and remove any remaining packing, tape or printed materials before using the washer.
Note: The bottom panel is located between the top foam used for protection and box.
Parts
a)1 Bottom Panel
b)6 Screws for the Bottom Plate
c)1 Water Inlet Hose
d)1 Drain Hook (Gooseneck)
e)1 Wrench
FRONT
FACE TO FLOOR
f)1 Quick Sink Faucet Adapter
g)2 Washers
h)1 Lint Filter
fi) 4 Caster
a | b | c | d |
|
Sink Faucet
Silver Faucet
Connector
Quick Sink
Faucet
Adapter
f | HOSE | g | h |
|
e
Optional 4 Pack
Check to make sure that the accessories are present and in good condition. If you find that they are not in good condition or are missing, please contact our customer service department for assistance. Our
