English English
Problems with water:
• Not enough water is coming in - The water faucet may need to be fully turned
ON. Water hose may be tangled or bent; straighten the hose. Check the water
level selection. It may need to be readjusted. This may cause the wash program
to pause for a few minutes after water inlet.
• Water leaks - This is due to improper installation of the drain hose or fill hose.
Your home drain may be clogged. You may need to tighten the hose, check the
plumbing or call a plumber. Water may also leak if the machine is
overloaded or if too much detergent is used.
• Water does not drain - This is due to improper installation of the drain hose.
You may need to connect the drain hose properly. Check the position of the
drain hose. The drain hose may be clogged or bent.
• Water flows out of the drain hose during the first use of the machine - This may
be the water left in the tub after the factory inspected the unit to test its
performance in order to ensure the best quality.
Washer makes noises:
• Washer may need to be reinstalled and leveled. Refer to the washer
installation section.
• Wash load may need to be rebalanced, as the load may be uneven.
• Coins, loose change, buttons or other heavy objects may be making the noise.
• A squeaking sound may be due to an overloaded wash tub.
• Vibration noises are due to an improper leveling of the washer or an uneven
distribution of clothing in the tub.
24