Before Using
How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation position of the drain hose.
Extend the drain hose from the side of wash tub
Back 
Soft item 
Front
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove.
(See to Figure 2).
Soft item
Embed the drain hose into the groove along the side of thewash tub in the order of (1)~(2), heading for the side of the wash tub. (See to Figure 3).
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend the drain hose from the rear side
Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Figure 1
Figure 2
Figure 3
Figure 4
Select the water level
Select water level according to the quantity of the laundries.
Set the water level adjusting lever to needed line.
Maximum
Water level indicator
Max.
about 43L
Medium Med.
about 36L
Minimum Min.
about 30L
