39EN 39EN
Disc
Management Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others
3 Use [K / L] to enter the date, then
press [B].
Timer Programming
1/1
TUE JAN/01 10:00AM
Date Start End L1/L2
New Program
Date
JAN/02
SP 2 : 00
Start
- - : - -
End
- - : - -
L1/L2
L1
REC To Mode
DVD SP
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
4 Use [K / L / { / B] or [the Number

buttons] to enter the start and end

time, then press [B].

1/1
New Program
Date
SP 2 : 00
Start End
- - : - -
L1/L2
L1
REC To Mode
DVD SP
JAN/02 12 : 00AM
• You cannot make a program whose recording
time exceeds 12 hours.
5 Use [K / L] to select an appropriate

external input (L1/L2) to which your

external tuner is connected, then

press [B].
1/1
New Program
Date
SP 1 : 00
Start End
L1/L2 REC To Mode
DVD SP
JAN/02 12 : 00AM 1 : 00AM
L1
6 Use [K / L] to select a recording media

(“DVD” or “VCR”), then press [B].

1/1
New Program
Date
SP 1 : 00
Start End
L1/L2 REC To Mode
SP
JAN/02 12 : 00AM 1 : 00AM
L1 DVD
7 Use [K / L] to select a recording

mode.

1/1
New Program
Date
SP 1 : 00
Start End
L1/L2 REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1 DVD SP
Refer to “Recording Mode” on page 33 for DVD
or “Recording” on page 99 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date
SP 1 : 00
Start End
L1/L2 REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1 DVD SP

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
1/1
New Program
Date
Auto 1 : 00
Start End
L1/L2 REC To Mode
JAN/02 12 : 00AM 1 : 00AM
L1 DVD Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8 Press [ENTER] when all items are

entered.

Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 40.
9 Press [TIMER SET] to set a timer

programming.

will appear on the front panel display, while this
unit waits to make the recording.
CS DR CD
HDD
DVD
“VCR” will appear on the front panel display if VCR
timer recording have been set.
TIMER RECORDING
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
E9KGAUD_D-VR610KU_EN.indd 39E9KGAUD_D-VR610KU_EN.indd 39 2007/12/18 17:10:132007/12/18 17:10:13