Arethe laundries slantinginspinning?Isthere power failure?The machine does
notact.
Clean the foreign material.
Open and close the top lid once.
Re-orderthe laundries.Closethe top lid.Useit when the power is on.
Levelthe machine properly.Insertthe power plug tightly.
Re-orderthe laundries.Nowash
No spin
Isthe power plug loose?Ifwater level reach the appoint level?Affusion to appointlevel.
Close the top lid
Is the top lid is notclosed.?
Are the laundries put
slantingly?
It is the water remained in the factoryinspection of performance.Phenomenan The reason How to settle
Common phenomena
Phenomena Explanation
Balance the laundries to avoid slanting.The program is setting the drain time. Some time is needed before it starts spinning.It is because that the laundries are slanting to one side, and the safety switch acts. Afterwater inlet and stirring, the slanting will be removed and the spinning will work.Trouble-shooting Answers to question(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it
to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Are the laundries put
slantingly?
Is the machine slanting?
The spinning is intermittent when it starts.In the final spinning, it stops and displays "Rinse", and starts water inlet.There may be some water flowing out ofthe drain hose in the first use of the machine.Push the "Process selector" button to select "Spin", but it doesn't work.In spinning, the machine stops
running. (The "wash" "rinse"
"spin" indicator flash quickly)
The draining does not work,
or the speed of draining is
tooslow ( the indicators of
"rinse" "spin" flash)
The safety switch acts. The
spinning can not work (the
indicators of "wash" "rinse"
flash quickly)
The program pauses after
about 15 minutes of water
inlet (the indicators of "wash"
"spin" flash quickly)
There's abnormal sound
inside the machine.
The water faucet leaks.
The top lid is not closed.
Is the drain hose blocked
by foreign material?
Close the top lid.
Levelthe machine in right position.
Open and close the top lid once.
The water inlet valve is
blocked
The water faucet is not open.
Thewater pressure is too low
andthe current is too small.
Open the water faucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Insertthe power plug tightly.
Isthe power plug loose?Re-order the laundries.
Close the top lid.
Is the machine slanting?
Is the jointer screw of the
water inlet hose is loose
or twisted awry?
Fasten the jointer screw
properly.