Haier XQB50-68 Contents

Names of the parts

Safety precautions

Contents

Disposal after washing

Trouble shooting

*Answers to question

Packing list Specification

Installation and adjustment

Installation the water inlet hose

Preparation before washing

Put in the laundries

Put in the detergent

Use the operation knobs

Close the top lid

Finish washing

Contents

Main Names of the parts Safety precautions Contents Warning sign Names of the parts Meaning and description of the symbols Forbidding sign Page Safety precautions Confirm it's horizontal: Adjust the adjustable foot: Install the bottom plate Adjust the installation position Installation and adjustment Install the lint filter How to change the direction of the drain hose Usage of the drain hose Figure 1 Figure 3 Figure 2 Install the water inlet hose Connection between the water inlet hose and the washing machine Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1Preparation before washing 2 Put in the laundries How to use the whitener 3 Add the detergent How to use the washing powder a Description of the function of the knobs and buttons 4 Use the operation knobsand buttons "Power" botton Off WaterLevel Medium High Reset b .Steps of using the operation buttons and description of the steps On Selection method of the procedure programs Attention 3.Adjust the "water level knob to select suitable water level 4 Press the "Start/Pause" button 6 The washing is finished 5 Close the top lid Disposal after washing Arethe laundries slanting inspinning? Isthere power failure? Re-orderthe laundries. Levelthe machine properly. Trouble-shooting Answers to question There may be some water flowing out of the drain hose in the first use of the machine. Push the "Process selector" button to select "Spin", but it doesn't work. Isthe power plug loose? Paching list Specification