Connection between the water inlet hose and the washing machineDismantle the water inlet hoseConnection between the jointer of the water inlet hose and the water inlet hoseCheck the connection between the jointer of the water inlet hose and the water faucet
1.Do not take off the water absorption cushion.
Please check if the cushion is dropped or
damaged before each usage. If it happens
please contact our after-sale department
immediately.
2.Put the nut of the water inlet hose on the
valve jointer.
3.Fasten the nut. Swing it gently to confirm
if it's suitable.
1.Close the water faucet.
2.Press the locking lever. Push down the slider.
Then pull off the water inlet hose. If the machine
is used more than once every week, the jointer
of the water inlet hose can be kept on the faucet
to prevent damaging the fixing screw.
1.Push down the slider. Insert the water inlet
hose into the jointer.
2.Hang the lock lever to the jointer. Release
the slider till a click sound is heard.
Locking lever
Slider
Water absorption cushion
Nut of the water I
nlet hose
Jointer of the
water inlet valve
Slider
Jointer of the
water inlet hose
Locking lever
1.Swing the hose gently to confirm if it is fastened
stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Each time before use please check if the
connection between the jointer of the water inlet
hose and the water faucet, and the installation
of the water inlet hose are firm, so as to prevent
dropping from improper installation position.