Haier XQB60-68 user manual Selection method of the procedure programs

Attention

Even there's no water in the tub, the spinning will start after a certain period. Do not use the "Twice wash" program for the woolen laundries.

Wash the laundries that are prone to lose colors separately from other laundries.

The pulsator will not rotate unless the water is filled to selected water level.

Selection method of the procedure programs

Times of pushing	Selected procedure	Applicable procedure	Contents (the lighted indicators
the "Process	program		indicate the programs about to run)
Selection" button
	Wash, rinse, spin	When the common laundries	Quick-	Twice-	Wash	rinse	spin
		need washing , rinsing and	wash	wash
	(standard program)
		spinning
	Wash (the washing	Repeat using the washing	Quick-	Twice-	Wash rinse		spin
	liquid remains in	liquid	wash	wash
	the tub)
	Wash, rinse ( the	Repeat using the washing	Quick-	Twice-	Wash	rinse	spin
	rinsing liquid remains		wash	wash
		liquid
	in the tub)
		When the laundries need	Quick-	Twice-	Wash	rinse	spin
	Rinse, spin	rinsing and spinning after	wash	wash
		manual washing
	Spin	When the laundries need	Quick-	Twice-	Wash	rinse	spin
		only spinning after manual	wash	wash
	(spin after drain)
		washing (first drain then spin)
	Twice-wash, wash,	If the laundries are very dirty,	Quick-	Twice-	Wash	rinse	spin
		or the sleeve and collar are	wash	wash
	rinse, spin	dirty, first soak then wash
	Quick-wash, wash,	When quickly wash the	Quick-	Twice-	Wash	rinse	spin
			wash	wash
	rinse, spin	light dirty laundries.

If you push the "Process Selection" button for 7 times, it will resume the original mode, and it will circulate like that.

If you select the "Quick wash" program, you have to set the full procedure of wash, rinse and spin. The procedure cannot be selected.