Haier XQB60-C user manual Close the top lid The washing is finished

				Using process
Procedure selection method
Times of pushing the	Selected procedure	Applicable circumstance	Contents (the lighted indicators
SELECT button			indicate the programs about to run)
	WASH, RINSE, SPIN	When the common laundries need	WASH		RINSE	SPIN
		washing, rinsing and spinning.
	WASH		WASH		RINSE	SPIN
	(the washing liquid	Repeat using the washing liquid
	remains in the tub)
	WASH - RINSE	When prevent the laundries from	WASH		RINSE	SPIN
	(the rinsing liquid	corrugating, and the laundries do
	remains in the tub)	not need spinning
		When the laundries need rinsing	WASH		RINSE	SPIN
	RINSE - SPIN	and spinning after manual washing
	Spin	When the laundries need only	WASH		RINSE	SPIN
	(spin after drain)	spinning after manual washing
		(first drain then spin)

Push the SELECT button for 5 times, and it will resume the initial mode. It will circulate in that sequence.

4.Switch the WATER LEVEL button to select suitable water level

According to the capacity of the laundries, choose the three water levels High Middle Low

After the water inlet as per the preset water level, in case additional water quantity is required, please first set the button to the Reset when the automatic inlet reaches the water level, you can turn to the needed water level.

5.Push the START/PAUSE button

5 Close the top lid. 6 The washing is finished.

If you open the top lid, the machine will stop working before spinning.

It beeps to indicate the finishing of washing

The power will be switched off automatically after the finishing of the washing.