Haier XQB60-C Common phenomena

There may be some water flowing out of the drain

hose in the first use of the machine.

It is the water remained in the machine during the

ex-factory performance inspection.

Phenomenon Reason How to solve

The water faucet leaks water

There's abnormal sound inside

the machine

The machine

does not act.

The safetyswitch acts, and the spinning

cannot work.The wash, spin, jeansand

speedy s lampsare flashing.

Common phenomena

Phenomena Explanation

The spinning is intermittent when it starts.

The pulsator pauses during waterfilling in washing and rinsing.

It is to balance the laundries to avoid slanting.

The program is setting the drain time. A certain

period is needed before it starts spinning.

It is to avoid splashing during water filling.

Trouble-shootingAnswers to questions

The top lid is opened.

Is the drain hose blocked?

Are the laundries put slantingly?

Is the machine slanting?

Are there any foreign materials?

Are the laundries put slantingly in

spinning?

Is there power failure?

Is the power plug inserted tightly?

Is the water level reached preset

position?

Is the screw of the water inlet hose

jointer loose?

Is the screw of the water inlet hose

jointer twisted awry?

Close the top lid.

Clean the foreign material. Push

the start button again.

Reorder the laundries. Close the top lid.

Set the washing machine horizontally and

then open and close the top lid once.

Adjust the machine to be even

Remove the foreign materials.

Reorder the laundries and close the top lid.

Fasten the screw of the jointer properly.

Please use it when there's power supply.

Insert the power plug tightly.

Fill water to the preset position.

Push the SPIN button, but it doesn't act.

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns

sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special

maintenance department or after-sale service department of our company. Do not repair it by yourself.

Not wash

Not spin Is the power plug inserted tightly?

Is the top lid closed reliably?

Are the laundries set flat?

Insert the power plug tightly.

Close the top lid.

Set the laundries flat.

No water inlet.

Is thepower plug plugged tightly?

Is thewater faucet opened?

Are thePOWER ON/OFF and

START/PAUSE buttons pushed down?

Plug the power plug tightly.

Open the water faucet.

Push the power ON/OFF button and

START/PAUSE button.

The wash, rinse spin and gentle s lamps are

flashing. The machine does not spin.

The wash, rinse, spin and jeans s lamps are flashing.The drainage cannot work, or is too slow.