7 Disposal After Washing Using process
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
1.Take off the lint filter
Put hand at the indicated positon. Push down to take it off. (See to Figure 1)
2.Clean the lint
Put it in water and clean while it is still wet. (See to Figure 2)
3.Install the lint filter
After cleaning, insert the bottom of the lint filter ( marked with
down side 
) into the filter frame, then push the upper part of the filter in ( marked with 
up side 
). (See to Figure 3)
The filter screen is likely to be blocked by foreign
materials and influence water inlet. Please clean it
with brush frequently.
Figure 1
Figure 2
Figure 3
If the cabinet is dirty, wipe it with wet soft cloth 
Do not wash with water directly.
Wipe with neutral detergent.
Do not wipe with thinner, petrol, alcohol, etc.
1.After washing, close the water faucet. (If desired, dismount the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.
