Quantity
Installation
Asshown in Fig.1, remove all the packing materials
(in cluding the foam base ). It is normal that there are
somewater drops on the plastic bag, the cushion and
theporthole. It is because of the water testing before
leavingthe factory.
Fig.1
Checkattachments and materials
Name Operational
manual
Quality
certificate
Water
hose
Drain
holder
Plastic
plugs
11113
Removethe packing screws as shown in Fig.2.
Thepacking bolts protect the appliance from impact damage during
transportation.Follow the steps below before using the appliance.
1.Remove the rear panel of the washing machine;
2.Remove the three packing bolts from the rear panel of the washing
machine,the rubber hose and then the shock ablorption steel channel;
3.Refit the back plate;
4.Fill the holes left by the packing bolts with plastic plugs.
(Attention: the packing bolts and rubber hose should be kept in a
safeplace for later use )
Thereis a plastic jacket packing the door catch, please remove it
whenyou unpack the machine. Do not let children touch it to void
dangerousthings.
Adjustingthe position of the washing machine.
Thewashing machine is provide with adjustable feet. Before use,
adjustthe feet until the appliance is level, as shown in Fig.3.
Fig.2
Fig.3
Maintenance
Removethe
backcover
Replacethe
rubberplugs
Insertthe channel
steelvibration locks
insertthe bolts
Tightenthe bolts
witha spanner
Replacethe back cover
1.Remove the power plug, open the porthole
andturn off the tap after washing to avoid to
producedamp and strange smell in the drum.
Ifthe washing machine is not going to be used
fora long period of time, put the drainage hose
aslower as possible to let the water in the pipe
outfor avoiding the water turns bad quality and
thenput the pipe to the original place.
3.Clean the detergent
cartridgeregularly:
Pullthe detergent cartridge
upand out then wash it out.
Putit back when it is clean.
2.The dissolved agent and anti-
septicsshould not be used to
cleanthe surface of the ma-
chineand rube apares. Only
theclothing soaked with some
soapliquid is suggested.
Warning:Remove the power
socketbefore the cleaning.
4.To prevent blockages to the
watersupply or the ingress of
contaminants,clean the water
inletand inlet water filter
regularly.
7.Remove the power plug and turn off the tap and open the door if the machine is not going
tobe used for a long period of time. With the method there would not be any bad smell inside
thetube.
6.If the machine is to be moved a distance
location,replace the vibration mounting locks
whichwere removed during installation as
shownbelow.
413
5.Clean the filter ( once a month )
Pressthe lower edge of the filter compartment
coverto open; ( Fig.1-2 )
Removethe filter by turning counterclockwise;
(Fig.3 )
Flashclean with running water;
Filterreplacement is the reverse of removal.
Caution:Attention shall be paid to ensure that
thefilter is replaced correctly to avoid possible
leakage.
Usinga flat-nose screw driver prizes the slits
oftwo ends of the button panel and move the
panelout with your hands. ( Fig.4-5 )
Fig.1 Fig.2 Fig.3
Fig.4 Fig.5