1.Parts and Features
1. | Control Panel | 2. | Light | 3. Handle |
4. | Shelf | 5. Foot | 6. Hinge Cover | |
7. | Fan Mask | 8. | Glass Door | 9. Lock |
Note: Your specific model of SNO wine cooler may differ slightly from the diagram above but its operation is essentially the same.
2. Installation
Handel Installation
Your wine cooler comes with a towel bar style handle. To install the handle, you will need a Phillips head screwdriver.
Look at the left side of the door frame, facing onwards. There are two small holes in the frame. Take the handle and hold it up to the door frame so that the holes in the handle line up with the holes in door frame. While holding the handle with one hand, insert a screw through the top hole and screw it into the top hole in the door frame. Then insert a screw in the bottom hole in the handle and screw it into the bottom hole in the door frame. Now insert the small „caps‟ included into the holes in the handle.
Note: On some models, the handle can be installed in either side of the door frame. To install the handle in the right side of the door frame, use a small flat head screwdriver to pry the caps out of their holes and follow the above instructions.
