Fujitsu 5000 Installing internal options to 5-inch expansion bays, Configure the internal option

■Installing internal options to 5-inch expansion bays

This section explains how to install 5-inch expansion bay options such as CD-ROM drive and 5- inch floppy disk drive. A CD-ROM drive is used below in an example of installation. Up to two 5- inch expansion bay options can be installed in your PC.

⁄Point

The retaining metal bracket is required for installing a 3.5-inch hard disk or magneto-optic disk drive.

Retaining metal bracket

1 Configure the internal option.

See the manual accompanying the internal options to configure the following items.

-To install an IDE-standard internal option: Set the master, slave, and cable select.

-To install a SCSI interface internal option: Configure the SCSI ID.

2

3

Remove the upper cover.

Remove the front panel.

4 Remove the blank panel (for installing the internal option to the lower 5-inch expansion bay).

Remove a screw to remove the blank panel.

5 Insert the internal option from the front side

of the PC main unit

41