Floppy Disk, Handling precautions, ⁄ Point

4 Floppy Disk

A floppy disk is a storage medium used to save programs and other information. This section explains how to mount and dismount floppy disks.

⁄Point

Use a floppy disk formatted for DOS. If a disk other than DOS is used, the operation may not execute correctly.

■Handling precautions

To prevent malfunctions, note the following precautions regarding floppy disks:

-Do not get wet.

-Do not open the disk shutter.

-Do not bend or place heavy objects thereon.

-Do not expose to magnetic force.

-Do not drop.

-Do not store in areas exposed to high or low temperatures.

-Do not store in a damp or dusty area.

-Do not overlay labels.

-Do not get wet.

■Mounting and dismounting a floppy disk

●Mounting a floppy disk

1 With the label facing left, insert the floppy disk into the drive shutter-end-first.

The floppy disk eject button clicks and is pushed out.

Floppy disk eject button

Shutter

Label

Page 24

Image 24

Fujitsu 5000 Floppy Disk, Handling precautions, Mounting and dismounting a floppy disk, Mounting a floppy disk, ⁄ Point

Contents

DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Greetings Command entries Conventions used in this manualWarning icons Representing keys and use thereof Conventions used in the text of the manual Screen display examplesIllustrations Custom-made options Warning and caution labels Rear of the PC main unit Inside the PC main unit Manual configuration Chapter 1 Installation and ConnectionChapter 3 Installing Internal Options Chapter 4 Troubleshooting Content InstallationSwitching on Switching off Installing Memory Modules Installing Expansion CardsInstalling Expansion Bay Options Error Messages Standard Specifications Cleaning Method1 Name and Function of Each Component Supplement Chapter 1 Installation and Connection and explains how to connect various cables 1 Installation Installation locationExample of installing the PC ⁄ Point Precautions to be taken by the PC user Precautions to be taken by the TV or radioPreventing electromagnetic interference with a TV or radio 2 Connection Attaching CRT display, keyboard, mouse, and LAN cables ⁄ Point Connect the power cord to the CRT displaythe rear of the CRT display Connect the power cord to the outlet Connect the CRT cable to the PC main unit Connecting the power cord Upon completion of all connectionsDo not plug or unplug the power cord with wet hands Chapter 2 Basic Operations power on and off and handle storage media 1 Switching on Press the power switch of the CRT displayPress the power switch of the PC main unit Wait about 10 seconds before switching the PC on or off again 2 Switching off Turning off the power via Windows1 Click Start Turning off the power via Windows NT 2 Click Shut Down 3 Reset Resetting the PC via WindowsResetting the PC via Windows NT 1 Click Start and Shut Down Click Start and Shut Down Select Restart and click OK Handling precautions 4 Floppy DiskMounting and dismounting a floppy disk Mounting a floppy disk 1 Confirm that the floppy disk access indicator lamp is off Dismounting a floppy disk2 Press the floppy disk eject button 5 CD-ROM Mounting and dismounting a CD-ROM disk Mounting a CD-ROMDismounting a CD-ROM 1 Press the EJECT button. The CD-ROM tray is ejected What is a hard disk? 6 Hard Disk Chapter 3 Installing Internal Options 1 Introduction Installing positions of internal options Removing the upper cover Removing the front panel1 Remove three screws at the rear of the PC main unit 2 Remove the upper cover 2 Installing Memory Modules DIMM DIMM Installing an additional memory Memory1 Remove the upper cover 2 Push down the hooks at both ends of the slot Removing the memory 3 Attach the upper cover 3 Installing Expansion Cards Expansion cards for PCI bus Plug & Play compatible cards Expansion card installation procedure for a PC using Windows Turning on the PC after installing the Expansion card installation procedure for a PC using Windows NT Starting and terminating the ICU For a PC using Windows NT Set up the resourcesSelect the Exit command and press the Enter key 1 If the PC is turned on, turn it off Installing an expansion card Slide the motherboard for installing a small expansion cardInsert the expansion card into the connector Remove the slot cover Install the motherboard when a large expansion card has been installed8 Install the retaining metal bracket at the side for installing a large expansion card 4 Installing Expansion Bay Options genuine internal options in the PC expansion bay Set up the jumper switch Replacing a internal hard disk equipped as standardIf retaining metal brackets are mounted on both sides of the internal hard disk to be replaced, remove them 7 Install the internal hard disk in the PC main unit 9 Attach the upper cover 10 Use BIOS setup to set the hard disk6 Replace the internal hard disk 8 Connect the cables to the hard disk Installing internal options to 3.5-inch expansion bays both sides of the internal hard disk to be installed, remove themSet the internal option Remove the upper cover Remove the front panel 7 Install a internal option in the retaining metal bracket 8 Install the internal option in the PC main unit6 Remove the retaining metal bracket from the PC main unit 10 Connect the power cord 9 Connect the flat cable 13 Use BIOS setup to configure the internal option 11 Attach the front panel12 Attach the upper cover Installing internal options to 5-inch expansion bays 1 Configure the internal option5 Insert the internal option from the front side of the PC main unit Secure the internal option with two screws Connect the flat cable 8 Connect the power cord dismounted10 Attach the front panel Hook Use BIOS setup to configure the internal option Attach the upper cover Chapter 4 Troubleshooting as expected 1 Error Messages Error messages displayed by the PCError Message Description and necessary action To boot booting the OS, press the F1 key. To run the BIOS Error Message Correcting errors 2 Troubleshooting The access lamp does not light upNo data is displayed on the screen The screen flickers Troubleshooting information on Windows The power is not turned on or the Power lamp on the front panelCharacters entered using the keyboard are not displayed does not light up If an error recurs The mouse is disabled and Windows 98 cannot end Appendix This appendix explains how to clean the PC and provides PC main unitspecifications 1 Name and Function of Each Component Front of the PC main unit Microphone terminal Rear of the PC main unit Power-switching switch OutletVentilation holes Inlet MONITOR Connect the CRT cable Inside the PC main unit Power supply unit 3.5-inch expansion bayRiser board Internal hard disk Motherboard/riser board CPU JP3 jumper switchInternal battery Primary IDE connector 2 Standard Specifications PC main unit specificationsDESKPOWER Product name Number of Storage LAN adapter specifications Sound specificationsLAN controller Intel Connector specifications CRT connectorLAN connector 100BASE-TX/10BASE-T Signal name Parallel connector Serial connector Mouse connector Keyboard connectorUSB connector SeriesA 3 Cleaning Method Cleaning the PC main unitCleaning the keyboard Cleaning a CD-ROM Cleaning a floppy disk drive Remove the ball and clean with waterClean the inside of the mouse For Windows 9X/NT model Note on using the display Note on using an analog liquid crystal displayDisplay disturbed when the screen mode is changed 4 Supplement About USB Windows 98/2000 printer, modem, and speaker interfaces Power Saving Function Wake up On LANLAN Cable LAN Adapter CD-ROM drive Intel processor serial numberMouse with scroll functionwheel Tel 65-776 Fax 65-776 8th Floor Wisma Damansara Jalan Semantan 50490 Kuala Lumpur MalaysiaTel 603-253 Fax 603-253

Fujitsu 5000 Floppy Disk, Handling precautions, Mounting and dismounting a floppy disk, ⁄ Point

Models: 5000

4 Floppy Disk

■Handling precautions

■Mounting and dismounting a floppy disk

●Mounting a floppy disk