■Expansion card installation procedure for a PC using Windows 98
Start
Before installing the expansion card, check resources that can be set for the
expansion card to be installed.
See the manual included with the expansion card.
Are the resources required by the expansion card unused resources of the PC?
Yes | No |
Release the resources by disabling the expansion card or hardware that will not be used by the PC.
Is the expansion card to be installed
Plug & Play compatible?
See the manual included with the expansion card.
| Yes |
|
| No |
|
|
|
|
| ||
Turning on the PC after installing the |
|
|
| ||
expansion card sets the device drive |
|
| |||
and resources automatically. |
|
|
|
| |
|
|
|
|
| |
See "Installing an |
|
|
|
|
|
expansion card" |
|
|
|
|
|
subsequently |
| Allocate the resources required by the |
| ||
described in this |
|
| |||
| expansion card to idle resources of the |
| |||
section. |
| For the allocation | |||
| PC (by pin setting for resource allocation). | ||||
|
| ||||
|
|
|
|
| procedure, see the |
|
|
|
|
| manual included with |
|
|
|
|
| the expansion card. |
|
|
|
|
| |
|
| Install the expansion card. | See "Installing an | ||
|
|
|
|
| expansion card" |
|
|
|
|
| |
|
|
|
|
| subsequently |
|
| Set the device driver for the expansion | described in this section. | ||
|
|
| |||
|
| card. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
End. The expansion card is ready for use.
⁄Point
-A device driver selected by the Plug & Play function has already been registered with Windows 98/2000. However, some device drivers have not been registered with Windows 98/2000, depending on the expansion card or peripheral device. In this case, use the floppy disk included with the expansion card containing the device drivers to set up the driver in accordance with the messages.
-Confirm that the device driver has been registered by the device manager before using the expansion card. If not registered, delete the device driver and restart Windows 98/2000.
28
