■Removing the upper cover
When installing internal options, remove the upper cover so as to reveal the inside of the main unit.
1 Remove three screws at the rear of the PC main unit.
2
2 Remove the upper cover.
Slide the upper cover to the rear of the PC main unit (in the direction of arrow 1 in the figure)
Lift and remove the cover (in the direction of arrow 2 in the figure).
⁄Point
1 |
-To replace the cover, reverse the above procedure.
-If the upper cover of the PC main unit is left removed, the internal battery life will shorten. Keep the duration when the upper cover is left removed at minimum requirement such as only for installing internal options.
■Removing the front panel
Remove the front panel when installing internal options in file bays. (Removal of the front panel is not required when installing a hard disk in a
1 Release hooks in order from 1 to 4 and | 1 | 3 |
pull out the front panel. |
|
|
2 | 4 |
|
⁄Point
To attach the front panel, secure the hooks in order from 1 to 4 in the figure.
22
