■Expansion card installation procedure for a PC using
Windows NT
Start
Before installing the expansion card, check the resources that can be set for
the expansion card to be installed. 
See the manual included with the expansion card.
Are the resources required by the expansion card unused resources of the PC?
Yes | No |
Release the resources by disabling the expansion card or the hardware that will not be used by the PC.
Is the expansion card to be installed Plug & Play compatible?
Yes | No |
|
|
See the manual included with the expansion card.
Install the expansion card.
See "Installing an expansion card" subsequently described in this section.
Register the resources required by the expansion card.
Lock the resources. |
|
| Allocate the resources required by |
| |
|
|
| the expansion card to idle resources |
| |
|
|
|
| ||
|
|
| of the PC (by pin setting for resource |
| |
|
|
| allocation). |
| |
|
|
|
|
|
|
|
|
|
| For the allocation procedure, see the manual | |
|
|
|
| included with the expansion card. | |
|
|
|
|
|
|
|
|
|
| ||
|
|
| Install the expansion card. |
| |
|
|
|
|
|
|
|
|
|
| See the manual included with the | |
|
|
|
| expansion card. | |
Set the device driver for the expansion card. 
For the setup procedure, see the manual included with the expansion card.
End. The expansion card is ready for use.
29
