Manuals / Fujitsu / Computer Equipment / Laptop

Fujitsu 5000 user manual Connection, ⁄ Point

Models: 5000

1 82

Download 82 pages 52.81 Kb

Page 14

2 Connection

2 Connection

Connect the display, keyboard, and power cord to your PC main unit

WARNING

Electric shock

Electric shock

Electric shock

●To prevent electric shock, ground the device (if required) before providing power to the equipment.

To prevent fire, do not connect the ground wire to a gas pipe.

●To prevent electric shock, unplug the PC main unit and connected equipment before attaching and detaching a CRT display, keyboard, mouse, LAN cables, and power cords.

●To prevent electric shock, fire, and/or malfunction, ensure that the display, keyboard, and mouse are all Fujitsu brand products.

CAUTION

Failure	● Ensure that cables are connected correctly.
	Using the PC and peripherals when
	connected incorrectly may result in a
	malfunction.
Fire	● To prevent a fire and/or malfunction,
	connect only the specified device to the AC
	service outlet (if provided).
Injury	● To prevent injury and/or malfunction, do not
	touch PC board components that are not
	specified.

⁄Point

To connect a LAN cable, use a twisted pair cable, which must be purchased separately as it is not included with your PC package.

Connect the LAN cable.

Secure one end of the twisted pair cable (purchased

separately) to the LAN connector at the rear of the PC main unit.

Connect the LAN cable. Secure the other end of the twisted pair cable (purchased separately) to the network connector.

4

Image 14

Fujitsu 5000 user manual Connection, ⁄ Point

Contents

DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Greetings Warning icons Command entriesConventions used in this manual Representing keys and use thereofIllustrations Conventions used in the text of the manualScreen display examples Custom-made optionsWarning and caution labels Rear of the PC main unit Inside the PC main unitChapter 3 Installing Internal Options Manual configurationChapter 1 Installation and Connection Chapter 4 TroubleshootingSwitching on ContentInstallation Switching offInstalling Expansion Bay Options Installing Memory ModulesInstalling Expansion Cards Error Messages1 Name and Function of Each Component Standard SpecificationsCleaning Method SupplementChapter 1 Installation and Connection and explains how to connect various cablesExample of installing the PC 1 InstallationInstallation location ⁄ PointPreventing electromagnetic interference with a TV or radio Precautions to be taken by the PC userPrecautions to be taken by the TV or radio 2 Connection ⁄ Pointthe rear of the CRT display Connect the power cord to the outlet Attaching CRT display, keyboard, mouse, and LAN cables ⁄ PointConnect the power cord to the CRT display Connect the CRT cable to the PC main unitDo not plug or unplug the power cord with wet hands Connecting the power cordUpon completion of all connections ⁄ PointChapter 2 Basic Operations power on and off and handle storage mediaPress the power switch of the PC main unit 1 Switching onPress the power switch of the CRT display Wait about 10 seconds before switching the PC on or off again ⁄ Point1 Click Start 2 Switching offTurning off the power via Windows ⁄ Point⁄ Point Turning off the power via Windows NT2 Click Shut Down ⁄ PointResetting the PC via Windows NT 3 ResetResetting the PC via Windows 1 Click Start and Shut DownResetting the PC via Windows Click Start and Shut DownSelect Restart and click OK ⁄ PointMounting and dismounting a floppy disk Handling precautions4 Floppy Disk Mounting a floppy disk2 Press the floppy disk eject button 1 Confirm that the floppy disk access indicator lamp is offDismounting a floppy disk ⁄ Point⁄ Point 5 CD-ROMHandling precautions Dismounting a CD-ROM Mounting and dismounting a CD-ROM diskMounting a CD-ROM 1 Press the EJECT button. The CD-ROM tray is ejectedHandling precautions What is a hard disk?6 Hard Disk ⁄ PointChapter 3 Installing Internal Options Consult this chapter as required1 Introduction Handling precautionsInstalling positions of internal options 1 Remove three screws at the rear of the PC main unit Removing the upper coverRemoving the front panel 2 Remove the upper coverDIMM DIMM 2 Installing Memory Modules⁄ Point 1 Remove the upper cover Installing an additional memoryMemory 2 Push down the hooks at both ends of the slot⁄ Point Removing the memory3 Attach the upper cover 1 Remove the upper cover3 Installing Expansion Cards ⁄ PointExpansion cards for PCI bus Plug & Play compatible cards ⁄ Point Expansion card installation procedure for a PC using WindowsTurning on the PC after installing the Expansion card installation procedure for a PC using Windows NTSelect the Exit command and press the Enter key Starting and terminating the ICU For a PC using Windows NTSet up the resources 1 If the PC is turned on, turn it offInsert the expansion card into the connector Installing an expansion cardSlide the motherboard for installing a small expansion card Remove the slot cover8 Install the retaining metal bracket at the side Install the motherboard when a largeexpansion card has been installed for installing a large expansion card4 Installing Expansion Bay Options ⁄ Pointgenuine internal options in the PC expansion bay If retaining metal brackets are mounted on Set up the jumper switchReplacing a internal hard disk equipped as standard both sides of the internal hard disk to be replaced, remove them6 Replace the internal hard disk 7 Install the internal hard disk in the PC main unit9 Attach the upper cover 10 Use BIOS setup to set the hard disk 8 Connect the cables to the hard diskSet the internal option Installing internal options to 3.5-inch expansion baysboth sides of the internal hard disk to be installed, remove them Remove the upper cover Remove the front panel6 Remove the retaining metal bracket from the PC main unit 7 Install a internal option in the retaining metal bracket8 Install the internal option in the PC main unit 10 Connect the power cord 9 Connect the flat cable12 Attach the upper cover 13 Use BIOS setup to configure the internal option11 Attach the front panel ⁄ Point5 Insert the internal option from the front side of the PC main unit Installing internal options to 5-inch expansion bays1 Configure the internal option ⁄ PointSecure the internal option with two screws Connect the flat cable 10 Attach the front panel 8 Connect the power corddismounted ⁄ Point⁄ Point Use BIOS setup to configure the internal optionAttach the upper cover Chapter 4 Troubleshooting as expectedError Message 1 Error MessagesError messages displayed by the PC Description and necessary actionDescription and necessary action Error MessageTo boot booting the OS, press the F1 key. To run the BIOS Error Message Description and necessary actionDescription and necessary action Correcting errorsError Message No data is displayed on the screen 2 TroubleshootingThe access lamp does not light up The screen flickersCharacters entered using the keyboard are not displayed Troubleshooting information on WindowsThe power is not turned on or the Power lamp on the front panel does not light upIf an error recurs The mouse is disabled and Windows 98 cannot endspecifications AppendixThis appendix explains how to clean the PC and provides PC main unit 1 Name and Function of Each Component Front of the PC main unitMicrophone terminal Ventilation holes Rear of the PC main unitPower-switching switch Outlet InletMONITOR Connect the CRT cable Riser board Inside the PC main unitPower supply unit 3.5-inch expansion bay Internal hard diskInternal battery Motherboard/riser boardCPU JP3 jumper switch Primary IDE connectorDESKPOWER 2 Standard SpecificationsPC main unit specifications Product nameProduct name DESKPOWER⁄ Point Number of StorageLAN controller LAN adapter specificationsSound specifications IntelLAN connector 100BASE-TX/10BASE-T Connector specificationsCRT connector Signal nameSignal name Parallel connectorSerial connector Signal nameUSB connector SeriesA Mouse connectorKeyboard connector Signal nameCleaning the keyboard 3 Cleaning MethodCleaning the PC main unit Cleaning a CD-ROMClean the inside of the mouse Cleaning a floppy disk driveRemove the ball and clean with water For Windows 9X/NT modelDisplay disturbed when the screen mode is changed Note on using the displayNote on using an analog liquid crystal display 4 Supplement⁄ Point About USB Windows 98/2000printer, modem, and speaker interfaces LAN Cable Power Saving FunctionWake up On LAN LAN AdapterMouse with scroll functionwheel CD-ROM driveIntel processor serial number 8th Floor Wisma Damansara Jalan Semantan 50490 Kuala Lumpur Malaysia 200 Pandan Loop #05-03 Pantech The Computer Centre SingaporeTel 65-776 Fax 65-776 Tel 603-253 Fax 603-253