Fujitsu 5000 Replace the internal hard disk, Install the internal hard disk in the PC main unit

6 Replace the internal hard disk.

Remove the four blue screws on the back of the retaining metal bracket, and then remove the standard-equipped hard disk. Then, use the blue screws to install the new hard disk.

7 Install the internal hard disk in the PC main unit.

Install the retaining metal bracket in the original position by lowering it in the direction of arrow

1, sliding it in the direction of arrow 2 , and then

sliding it again in the direction of arrow 3 . Then, secure the retaining metal bracket with the screw that was removed in step 5.

8 Connect the cables to the hard disk.

Reconnect the power cord and flat cables that were disconnected in step 4.

Be sure to connect the flat cables to the connector with the MASTER marking.

To prevent malfunction, be sure to place the cables back in their original positions.

9 Attach the upper cover.

10 Use BIOS setup to set the hard disk.

Set the type of the installed hard disk by BIOS

setup ( see "Primary master/slave" in "Main Menu," "BIOS Setup").

1

3

2

⁄Point

BIOS Setup

A guide to your Deskpower 5000 BIOS is available online. Please visit our technical support section at www.fujitsu-pc-asia.com. Once there, click on the desktop series from the pull down menu and select the appropriate desktop model.

36