Error Message | Description and necessary action |
|
|
An invalid hard disk drive was set. | Confirm ‘Primary master’ or ‘Secondary master’ on the |
| BIOS setup main menu. If the message is still displayed, |
| contact a dealer or the your local distributor. |
|
|
Turn the power off, then on again. | If the message is still displayed, contact a dealer or the |
| your local distributor. |
|
|
Confirm BIOS setup items, then | If the message is still displayed, contact a dealer or the |
save. | your local distributor. |
|
|
Because the computer was not | This message is displayed if an invalid BIOS setup value |
booted correctly last time, some | is defined to boot the system, the power is turned off |
of the setup values are reset to | during boot, or the computer is rebooted three or more |
defaults. | times in the same operation. To continue booting, press |
| the F1 key. To run the BIOS setup utility and check setup |
| values, press the F2 key. |
|
|
If an error occurs during POST, | To boot booting the OS, press the F1 key. To run the BIOS |
this message is displayed before | setup utility and change setup values, press the F2 key. |
the OS boots. |
|
|
|
Check date and time settings | Confirm 'System Time' and 'System Date.' |
|
|
47
