840141100 ENv02.qxd 9/22/05 1:39 PM Page 6

Features (on selected models)

Adjustable Steam Switch

This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting Chart” for details. Set

the switch to Dry Iron to iron with- out steam.

Spray and Blast of Steam Buttons

Push Blast Button for an extra blast of steam. Do not press Blast Button more than every 2 seconds. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.

Auto Shutoff Reset Button/Light

This light comes on when the iron is first plugged in.

After one hour, the iron will shut off and the light will go out. Push the Reset Button/ Light to turn the iron back on.

Vertical Steam

1.Follow Steps 1 through 3 in “To Steam Iron.”

2.Turn Temperature Control Dial to highest setting.

3.Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror.

4.Hold iron about 6 inches away from garment and

press and release Blast Button to steam out wrinkles. Do not press Blast Button more than once every 2 seconds.

5.To turn iron off, turn Temperature Control Dial to OFF ( O ). Unplug iron.

6.Empty water from the iron following directions in “Caring for Your Iron.”

NOTE: Do not allow hot soleplate to touch delicate garments.

6

Page 6
Image 6
Hamilton Beach 14200 manual Adjustable Steam Switch, Spray and Blast of Steam Buttons, Auto Shutoff Reset Button/Light