Hamilton Beach 49983 How to Use Single-ServeSide, Brewing Single-ServePacks, wCAUTION Burn Hazard

How to Use Single-Serve Side –

Brewing Single-Serve Packs

wCAUTION Burn Hazard.

To avoid contact with hot coffee or water:

•DO NOT use more than 10 oz. (296 ml) of water for single-serve pack or 14 oz. (414 ml) for grounds. Too much water causes ERR message and long beep. SOLUTION: Place carafe on warming plate. Turn brew selector dial to Carafe (). Press l/O button to remove water. Turn brew selector dial to single-serve side (). Add correct amount of water to water reservoir. Start brew process.

• Fill reservoir with cup or travel mug of water into which the coffee will be brewed.

•Fully insert cup or travel mug under brew basket.

•For best results, use K-Cup®* packs.

NOTES:

•The unit will only brew on one side at a time.

•For Hotter Coffee: Rinse the mug with hot water before brewing.

•The Brew Mode selection will stay in the last mode used, unless unplugged.

•Coffee may continue to drip after brewing is complete (after 3 beeps) when using finely ground coffee.

•Programming mode cannot be used on Single-Serve side.

1

Fill reservoir with cup or travel mug into which the coffee will be brewed (maximum 10 oz. [296 ml] water).

2

Plug in coffee maker. Rotate brew selector dial to the right to select Single-Serve (). Press BREW OPTIONS button to select .

3

Remove brew basket. Place a pack into the single-serve pack holder.

wCAUTION Cut Hazard: Single- serve pack holder has a sharp blade. Handle with care.

*K-Cup is a registered trademark of Keurig, Inc. Use of the K-Cup trademark does not imply any affiliation with or
endorsement by Keurig, Inc.	5