Hamilton Beach 49983 manual Brewing Coffee Grounds or Soft Pods, How to Use Single-ServeSide

How to Use Single-Serve Side –

Brewing Coffee Grounds or Soft Pods

wCAUTION Burn Hazard.

To avoid contact with hot coffee or water:

•DO NOT use more than 10 oz. (296 ml) of water for single-serve pack or 14 oz. (414 ml) for grounds. Too much water causes ERR message and long beep. SOLUTION: Place carafe on warming plate. Turn brew selector dial to Carafe (). Press l/O button to remove water. Turn brew selector dial to single-serve side (). Add correct amount of water to water reservoir. Start brew process.

•Fill reservoir with cup or travel mug of water into which the coffee will be brewed.

•Fully insert cup or travel mug under brew basket.

•Remove single-serve pack holder before adding coffee grounds to brew basket.

• To avoid overflow, keep ground coffee below MAX fill line. This unit can be used with

Melitta®† soft pods, available in the coffee aisle of your local

grocery store. NOTE: It can take up to 2

minutes before brewed coffee starts dispensing into your cup or travel mug.

1

Fill reservoir with cup or travel mug into which the coffee will be brewed (maximum 14 oz. [414 ml] water).

2

Plug in coffee maker. Rotate brew selector dial to the right to select Single-Serve (). Press BREW OPTIONS button to select GROUND mode.

3

To remove single-serve pack holder, grasp the single-serve pack holder cup; slide towards the back and then lift out.

wCAUTION Cut Hazard: Removable single-serve pack holder has a sharp blade. Handle with care.

†Melitta is a registered trademark of Melitta Haushaltsprodukte GmbH & CoKG. Use of the Melitta trademark
does not imply any affiliation with or endorsement by Melitta Haushaltsprodukte GmbH & CoKG.	7