4.Cut food to fit food chute. Pack food chute tightly with food. Insert food pusher in chute. Always use the food pusher to feed food into the chute. NEVER PUSH FOOD THROUGH CHUTE WITH HANDS.
5.Plug in unit and process food.
6.Select speed. While pressing on
food pusher, push ON ( l ) or
PULSE 
to process food.
7.When food chute is empty, push OFF ( O ) or release from PULSE 
position. Wait until blade has stopped rotating before removing cover.
How to Operate the Controls
ON OFF | Low High | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pulse/Momentary |
|
|
|
The control panel provides quick- | Control Switch: This switch gives you | |||
reference graphics which indicate | three choices: ON ( l ), OFF ( O ) or | |||
the correct blade or disc for a job: | PULSE/MOMENTARY . |
| ||
Speed Switch: Push the switch to | Selecting the ON ( l ) position will | |||
either Low (•) or High (••) speed | cause the motor to run continuously | |||
before turning on the motor with the | until you push the switch to OFF ( O ). | |||
control switch. | The PULSE/MOMENTARY | position | ||
|
| will cause the motor to run only until | ||
|
| you release the switch; then it auto- | ||
|
| matically springs back to the OFF ( O) | ||
|
| position. |
| |
7
