Food Processor Safety
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions.
2.To protect against risk of electrical shock, do not immerse base, motor, cord, or plug in water or other liquid.
3.Close supervision is necessary when used by or near children.
4.Unplug cord from outlet when not in use, before putting on or taking off parts, and before cleaning.
5.Avoid contacting moving parts. Keep fingers out of discharge opening.
6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Call our
7.The use of attachments not recommended or sold by Hamilton
8.Do not use outdoors.
9.Do not let cord hang over edge of table or counter, or touch hot surfaces.
10.Never feed food into food chute by hand when slicing or shredding food. Always use food pusher.
11.The blades and discs are sharp. Handle carefully. Store out of reach of children.
12.Make sure the blade or disc has come to a full stop before removing cover.
13.Keep hands and utensils away from moving blades and discs while process- ing food to reduce the risk of severe personal injury and/or damage to the food processor. A rubber scraper may be used but ONLY when the food processor is not running.
14.To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl properly in place.
15.Be certain cover is securely locked in place before operating appliance.
16.Do not attempt to defeat the cover interlock mechanism.
17.To reduce the risk of injury, be sure to insert or remove blades and discs using finger holes provided for this purpose.
SAVE THESE INSTRUCTIONS!
Consumer Safety Information
This appliance is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way.
To avoid an electrical circuit overload, do not use another high wattage appliance on the same circuit with your food processor.
The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the food processor. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
2
