7.Select speed. While pressing on
food pusher, push ON ( l ) or
PULSE 
to process food.
8.When food chute is empty, push OFF ( O ) or release from PULSE 
position. Wait until blade has stopped rotating before removing cover.
Continuous Processing
IMPORTANT: When using the continuous feed chute the food gate must be removed and the continuous feed disc must be in place.
1.Make sure the Control Switch is turned to OFF ( O ) and the unit is unplugged.
2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 5.)
3.Put disc shaft onto motor shaft.
4. Place the continuous feed disc, ribbed side up, onto the disc shaft. Turn the disc slowly until it drops into position (level with top of bowl).
Continuous
Feed Disc
Disc Shaft
5.Select desired side of reversible slicing/shredding disc and place that side up on the disc shaft.
Slicer/Shredder
Disc
Disc Shaft
6.REMOVE FOOD GATE FROM CONTINUOUS FEED COVER TO PREVENT DAMAGE TO UNIT. Place a paper towel over the food gate slot to avoid food or liquid from splashing out.
7.Lock on cover. (See “How to Lock the Cover” on page 5.) Place bowl under feed chute.
8.Plug in unit and select speed. Process food. Check the continuous feed chute frequently to make sure the opening is not blocked. If blocked, turn unit off and unplug. Clear blockage, then reassemble and continue processing.
Hint!
We do not recommend using the con- tinuous feed chute feature to slice meats or cheeses or when shredding root vegetables (carrots, potatoes, etc.).
As with most continuous feed processors, shredded moist vegetables may clog in the chute. It is best to shred these veg- etables into the food processor bowl. Slicing these root vegetables while using the continuous feed chute will not present a problem.
NOTE: When using the continuous feed chute, some food may fall into the food processor bowl.
7
