![](/images/new-backgrounds/1271636/2716365x1.webp)
840101300 ENv02.qxd 5/10/02 11:22 AM Page 4
To Steam Iron
1.Unplug iron. Using a cup, slowly pour 4 ounces (1⁄2 cup) of tap water into water tank opening. Do not fill iron directly from faucet.
2.Plug iron into outlet. Set Adjustable Steam Switch to STEAM.
3.Turn Temperature Control Dial to desired fabric setting in steam range. Allow two minutes for the iron to reach desired temperature.
4.To turn iron off, set Adjustable Steam Switch to 0 (Dry Iron). Turn Temperature Control Dial to Off. Unplug iron.
5.Empty water from iron following directions in “Caring for Your Iron.”
Features
Features (cont.)
Power On Light
This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
Power
Light
Adjustable Steam Switch
This switch provides continuous steam in the STEAM position. Push the switch to 0 to change to dry iron.
Auto Shutoff Reset Button/Light
The light comes on when the iron is first plugged in even if Temperature Control Dial is set at Off. The light indicates that the iron is plugged in. After 15 minutes, the iron will shut off and the light will blink. Push the Reset Button to turn the iron back on.
Reset
Button
Light
Spray and Blast of Steam Buttons
Push spray button to release a fine spray of water for difficult wrinkles in cotton or linen. Push blast button for an extra blast of steam.
Blast of
Steam Spray
4 | 5 |